If you are getting the following error when running a PHP script that relies on Curl

Fatal error: Call to undefined function curl_init() in…

Then the solution that worked for me is here

http://www.sitepoint.com/forums/showthread.php?695011-curl-not-working-on-localhost

Burn it or place it in a flash drive

At boot select “Run Trinity Rescue 3.4 …”

Select “Windows Password Resetting”

Select “Clear administrator password” and follow the instructions

Reboot and press F8 to go into get the Windows boot options screen

Select “Last Known Good Configuration” (This step is important, otherwise you get a blue screen)

Listo!

You can protect your serial key by simply covering with transparent tape.

If you have been infected by this virus follow my instructions for removal.

If you are experiencing this problem you might need to change some settings in your wireless router. Here is a quick fix that worked for me.

1. Access the administration settings of your router.
   For OEM Routers: usually you can type 192.168.1.1 in the address box of your browser and press ENTER
   For AT&T Routers: type 192.168.1.254
2. Change the mode setting to “b/g only”

This website shows more settings in case the quick fix did not work for you.

If you have not gotten infected, make sure Windows Restore is running

• Windows XP
• Windows Vista
• Windows 7

Update your antivirus definitions.  Most antivirus programs do this automatically and will display an alert if the definitions are not up to date. Your virus definitions may be out of date because of loss of internet connection, or the computer has not been on for a while.

You may still get infected if the virus definitions do not contain instructions to detect the new virus. In that case, system restore becomes very handy. Simply reboot your computer and press F8 key repeatedly (this is one of the keys on the top of the keyboard that are labeled F1, F2, F3, … F12). In some keyboards with extra fucntions, the labeling may not be obvious, but their location is the same on all keyboards).

When you get to a black screen with white letters. Select the following depending on your operating system

• Windows XP – Select “Safe Mode”
• Windows Vista and 7 – Select “Repair your computer”

Since the virus runs as soon as we get into Windows in normal mode, we need to run the operating system in safe mode, which basically means the operating system would only load the bare essentials and hence the virus wont be able to run.

This allows us to access the system restore and revert the settings on your computer to a date before the virus infected you . Follow these steps to complete the restore process.

1. Windows XP
2. Windows Vista and 7

As soon as you get back to normal Windows, you will notice the virus is not running anymore. We have won the battle but not the war…yet.

Download and run ComboFix by doing a quick google search. This will get rid of the files that belong to the virus. (Opening these files will get your computer reinfected)

After this, run your antivirus program to get rid of other traces.

Finally, follow the preemptive actions described above so you can be ready if the virus attacks again.

$20 off Kaspersky’s fastest, smartest PC protection & 6 months free for a friend Offer Expires 01/03/11

Thankfully many companies have come out with software to monitor your hard drives. Most Linux distros already have this feature, but OSX and Windows do not come with hard drive monitoring software. The software I have been testing for the past two months on some of my clients computers is Acronis Disk Monitor. It warns you about potential hard drive failures and determines the health status of your hard drive based on SMART flags. best of all, it is FREE.

I recommend anyone to install it on their Windows machines (unfortunately its not for OSX). Try it out and report your experience here.

This other symptom may be unrelated, but the frequency of computers arriving with the same problem on the same day is higher than usual. These computer all have the dreaded BSOD (Blue Screen of Death). Simply running CHKDSK /r in windows recovery console allows the computer to enter Windows again, but then the symptoms described above are exibited.

At this point performing a Windows repair fixes the system. Running tools like COMBOFIX, WINSOCKFIX, and WINDOWS RESTORE do not fix the problem.

We will continue to conduct an investigation to confirm that these symptoms are the result of a virus. We will post any results here.

Senario 1: You insert the Windows CD and the hard drive is displayed, ready for installation.
In this case you have a good chance of having a sucessful installation. Sometimes you may get a blue screen after the installation, if this happens follow the steps on  senario 2.

Senario 2: Hard drive is not dectected.
In this case download the SATA/IDE driver for you motherboard. The driver is sometimes a standalone driver or it comes with the chipset drivers.

• For Vista and 7, place these drivers in a flash drive, insert the flash drive in the computer you will install Windows on, and when you get to the formatting options screen select Load Driver. Locate the drivers on your flash drive, select it and press Next.
• For XP, install a Floppy disk drive and place the SATA/IDE drivers in a floppy drive. Insert the Windows XP CD and press F6. Follow the instructions on the setup to add the SATA/IDE drivers. In case you do not have a floppy, then you need to create a slipstream cd using nlite.

In the rare event installing the drivers still gives you a blue screen, and you already scanned your ram using Memtest, and tested your hard drive with the vendor’s diagnostic utility, then the problem might be related to the version of Windows (i.e Reatail vs OEM, SP1 vs SP3, etc). Different versions of windows can be made using nlite.